POE Over Coax EOC Converter Ethernet Over Coax

POE Over Coax EOC Converter Ethernet (IP) Over Coax

3 Main Reasons to Use Linovision POE IP Over Coax Converters

Reason 1
Upgrade traditional analog camera system to IP surveillance system without replacing existing coaxial cable (RG59 cable)

Reason 2
PoE Extend up to 3,000ft without repeaters

There are some situations that users need to transmit PoE power and data over ultra long distance, for example, power a remote security camera from 500 meters (or 1,640ft) away (from one building to another building), or supply power to a PoE IoT device from one side to another side of an underwater tube. The regular PoE extender will extend 100 meters only. With Linovision innovative EOC solution, it makes this possible to transmit PoE power and data over max. 1,000 meters (or 3,300ft) through regular Cat5e or Cat6 cable, this will reduce thousands of dollars in cabling cost.

Reason 3
POE +Data Transmission over Twisted pair cable, coax cable, telephone cable, doorbell camera, or any two-pin cables

There are some locations that without network cables but still need POE power and data transmission, for example elevator carts in many buildings, or doorbell cables, LINOVISION EOC converters is perfect for this application. It can transmit POE power and IP data over coax RG59 cable, twisted pair cable, doorbell cable, telephone cable, or even power cables. The remote connected device can be IP cameras, IP Video intercoms, IP phones, or IP controllers, etc.

IoT Application

EOC (Ethernet Over Coax, also known as IP over Coax) Converter is used to transmit Video&Audio&Data over existing coaxial cables. Features with POE & IP data transmission and passive design, LINOVISION EOC converter is designed to upgrade traditional analogue video surveillance system to IP surveillance system without replacing coaxial cables. It is working with POE IP cameras, POE Wi-FiAP, VoIPphones, etc.

Outstanding Features:

IP Video & Audio & Data & POE Power transmission over coaxial cable
Max 1000 meters(3000ft) transmission
Up to100Mbps bandwidth over 1,000 feet regular coax cable transmission, working with CCA/CCU RG59/RG6 cable
Plug-and-play, configuration free.
Small size (3.1“x2.0”x0.9“), light weight, fit into regular cameraback box.
Compatible to IEEE802.3af/IEEE802.3at POEprotocol, max21W POE load capacity in 100m(330ft), or 11W POE load capacity in 300m(1000ft).
Optional water-proof box for outdoor use
Working with POE IP Cameras, POE Wi-Fi AP, VoIPphone, Non-Poe Device, etc
1* RJ45 port:10/100Mbps, MDI/MDIX self-adaption; 1*BNC RG59 coaxial

Industrial design

Industrial design, with built-in heat sink Ensure super reliability and hassle-free transmission.

POE power + Data transmission

It can provide power to remote POE device with max. 30W power consumption and no local DC power adapter is required.

Ethernet over Twist pair cable

Ethernet over Twist pair cable, power line, or almost any two-pin cables.

Connection Diagram

General EOC Applications

Upgrade traditional analogue system to IP surveillance system while using existing coaxial cable(RG59 cable)
Remote network & power transmission for POE compatible devices over coaxial cable,such as VoIP phone, WiFi AP (POE enabled)
Remote network connection over long distance coaxial cable (100Mbps bandwidth in 300 meters or 1000ft transmission)

Application in Elevator

FAQ

Q: Why my POE device is offline when working with our EOC (IP Over Coax) Converter?

A: Several main reasons are as follow:

1. Because of reverse connection. EOC transmitter should be connected to POE device (IPC/VoIP), and EOC receiver is connected to POE supply device (POE NVR, POE Switch or POE Injector).

2. It is used for point-to-point coax cable direct connection ONLY, no BNC repeater/T-connect/splitter in the middle.

3. Because of insufficient load capacity. The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras or VoIP phones.

4. Because of no power supply. Please be informed that EOC receiver has to be connected to an POE NVR, POE Switch or POE Injector to be powered.

PoE + Ethernet over Coaxial (EOC) Converter, Upgrade Analog to IP Surveillance System without Replacing Coaxial Cables

3 Main Reasons to Use Linovision POE IP Over Coax Converters

Reason 2
PoE Extend up to 3,000ft without repeaters